# LABORATORIO DI FISICA I M - ZModule LABORATORIO

**Academic Year 2022/2023**- Teacher:

**Cristina Natalina TUVE'**

## Expected Learning Outcomes

The course gives the background of Laboratory of Physics and Statistics.

The students teach the experimental method and the experimental data analysis techniques.

The number of hours the student attends the laboratory is 90 hours. During the experimental work the students are followed by the teacher and a tutor. There is, also, the presence of the lab technician.

At the end of the course the student will have:

- Ability of inductive and deductive reasoning
- Ability to assemble and fine-tune some basic experimental configurations, and to use scientific instruments for thermomechanical measurements
- Ability to perform a statistical analysis of experimental data.

Furthermore, in reference to Dublin Descriptors, this course helps to acquire the following transversal skills:

__Knowledge and understanding:__

- Ability of inductive and deductive reasoning.
- Ability to describe a physical phenomenon in terms of scalar and vector fields.
- Ability to describe a problem in terms of suitable (algebraic, integral, or differential) relations among physical magnitudes through analytical or numerical methods
- Ability to assemble and fine-tune some basic experimental configurations, and to use scientific instruments for thermomechanical measurements
- Ability to perform a statistical analysis of experimental data

__Applying knowledge and understanding__

- Ability to apply one's knowledge to describe physical phenomena using scientific methods rigorously.
- Ability to plan or devise simple experiments and to perform a statistical analysis of the experimental data thereby obtained in all areas of interest of physics, including those with technological applications.

__Making judgements__

- Ability of critical reasoning
- Ability to select the most suitable methods to critically analyze, interpret, and describe experimental data.
- Ability to identify the predictions of a theory or of a model.
- Ability to estimate the accuracy of measurements, the linear character of an instrument's feedback, sensitivity and selectivity of the techniques under use.

__Communication skills__

- Ability to orally present scientific topics, with a suitable vocabulary and sufficient rigour, with attention to motivations and results.
- Ability to present scientific topics, in a written form, with a suitable vocabulary and sufficient rigour, with attention to motivations and results.

## Course Structure

The teaching is divided into lectures, that will be held in the first part of the course, and experiments to do in the laboratory in the second part.

The frontal hours are dedicated to the measurement method, data analysis and statistical elements. Are provided exercises during head-hours in order to prepare students to perform correctly laboratory experiences that they will do in the second part of the teaching.

6 credits (corresponding to 7 hours each) are dedicated to lessons in the classroom, for a total of 42 hours, and 6 ECTS (corresponding to 15 hours each) are dedicated to laboratory exercises, for a total of 90 hours. The course, of 12 CFU, thus includes a total of 132 hours of teaching activities.

During the course, guided tours will be scheduled to the National Laboratories of the South and to the Research Institutes working at the Department of Physics and Astronomy*.*

*Should teaching be carried out in mixed mode or remotely, it may be necessary to introduce changes with respect to previous statements, in line with the programme planned and outlined in the syllabus.*

## Attendance of Lessons

Attendance to lectures is usually compulsory.

During the workshop are collected attendance signatures.

The unjustified absence of more than 25% of laboratory exercises will exclude the student from the possibility of taking the exam in that academic year.

Classroom lessons are normally held 3 times a week, 2 hours each lesson.

The sessions in the Laboratory are normally held 3 times a week, 2 hours each session.

## Detailed Course Content

The course is 12 CFU. 132 hours including classroom lessons and laboratory exercises.

In particular, 42 hours of classroom instruction and 90 hours of guided laboratory exercises are planned include both the description of the different experiments in the laboratory and the taking and analysis of the data

**Analysis of the experimental data and statistics **

- The Scientific Method
- The measurement of physical quantities. Definition (operational) of physical quantities and its measurement. Fundamental and derived quantities. Units of measurement and units of measurement systems: The International System.
- Presentation of the measures and significant digits. Read a formula and verify its correctness (dimensional analysis)
- Features of a measuring instrument
- Errors and / or uncertainties. Systematic and random errors.
- The total error in measurements, relative error, degree of precision.
- Measures single and / or multiple. The best estimate of the error (mode, median and mean)
- Random events, aleatorie- variables classical definition, relative frequency and axiomatic probability - Total probability, conditional probability, likely composed
- Statistical population - sampling - law of large numbers - mathematical expectation for discrete and continuous random variables - probability density - moments - central limit theorem
- Standard deviation, population standard deviation, and sample average.
- Error propagation.
- Representation of data: tables, diagrams and graphs.
- Histograms: discreetly to limit distribution.
- The distribution of Gaussian distribution as a limit for measures affected by random errors.
- The measure of a physical quantity influenced by random events and estimate of the expected value.
- The criterion of maximum likelihood.
- Probability distributions: t-student, Gaussian, Binomial , Poisson and χ2-distribution distribution
- Test of chi-square.
- Graphic and functional relationships

**Description of laboratory experiences (12h)**

**Laboratory experiments (78 hours ):**

Measures of lengths: Caliper, palmer • Inclined plane • • Fletcher and Atwood Machine Device • Simple pendulum • Physic Pendulum• Kater reversible pendulum • Pendulum ball, spherometer • Pendulum on bow • Torsion Pendulum • Needle Maxwell • Springs • moment of inertia of a flywheel • rotational kinetic energy.

Pycnometer • Mohr-Westphal balance • viscometer Ostwald • Tension • Venturi tube • Sedimentation.

Calorimeter mixtures of Regnault • Heat propagation in a homogeneous beam • -Equazione perfect gas state of Desormes • Experience and Clement • Kundt Tube • Galton Quinconce

*Learning assessment may also be carried out on line, should the conditions require it.*

## Textbook Information

- J.R. Taylor: Introduzione all'analisi degli errori. Lo studio delle incertezze nelle misure fisiche, Zanichelli
- M. Loreti: Teoria degli Errori e Fondamenti di Statistica, Decibel, Padova
- R. Bevington: Data Reduction and Error Analysis for the Physical Sciences
- R. Ricamo: Guida alle Esperimentazioni di Fisica, Ed. Ambrosiana, Milano
- E. Perucca: Fisica Generale e Sperimentale, UTET, Torino
- F.Tyler: A Laboratory Manual of Physics E.Arnould, London
- lecture slides

## Course Planning

Subjects | Text References | |
---|---|---|

1 | tutti gli argomenti trattati | Taylor e Loreti |

2 | Piano inclinato | Ricamo 6.2 p. 89; Perucca ~ pp. 192, 214, 219, 224, 263, 497 |

3 | Dispositivo di Fletcher | Ricamo ~ 6.2 p. 90; Perucca ~ pp. 225, 265 |

4 | Macchina di Atwood | Ricamo ~ 6.2 p. 90 ; Perucca ~ pp. 224, 277, 308, 345 |

5 | Pendolo semplice | Ricamo ~ 6.3 p. 100; Perucca ~ pp. 193, 275; Tyler ~ p. 22 |

6 | Pendolo fisico piano (o pendolo composto) | Ricamo ~ 6.3 p. 99; Perucca ~ p. 313; Tyler ~ p. 24 |

7 | Pendolo sferico e su arco | Ricamo ~ 6.6 p. 110; Tyler ~ p. 28 |

8 | Sferometro | Ricamo ~ 3.2 p. 35; Perucca ~ p. 45; Tyler ~ p. 68 |

9 | Pendolo di torsione | Ricamo ~ 5.8 p. 82; Tyler ~ p. 42 |

10 | Ago di Maxwell | Tyler ~ p. (44), [34] |

11 | Molle | Ricamo ~ 5.1 p. 69; 6.9 p. 122; Perucca ~ pp. 38, 391, 378, 384; Tyler ~ p. 18 |

12 | Momento d’inerzia di un volano | Ricamo ~ 6.7 p. 113 Perucca ~ p. 307 Tyler ~ p. 34 |

13 | Energia cinetica di rotazione | Perucca ~ p. 309; Tyler ~ p. 32 |

14 | Quinconce di Galton | Giornale di Fisica XIX (1978), p. 54; http://cirdis.stat.unipg.it/files/macchina_galton/macchina_galton/index.html |

15 | Calorimetro delle mescolanze di • Regnault | Ricamo ~ 8.10 p. 167; Perucca ~ p. 659 |

16 | Propagazione del calore in una sbarra omogenea | Perucca ~ p. 680 |

17 | Picnometro | Ricamo ~ 4.8 p. 60; Perucca ~ pp. 86, 88; Tyler ~ p. 12 |

18 | Bilancia di Mohr-Westphal | Ricamo ~ 4.9 p. 62 • Perucca ~ p. 88 |

19 | Sedimentazione | Ricamo ~ 7.15 p. 150 • Perucca ~ p. 493 Tyler ~ p. 64 |

20 | Viscosimetro di Ostwald | Ricamo ~ 7.12 p. 146 • Perucca ~ pp. 374, 486 |

21 | Tensione superficiale | Ricamo ~ 7.6 p. 133 Perucca ~ pp. 436, 451 Tyler ~ p. 58 |

22 | Tubo di Venturi | Ricamo ~ 7.8 p. 136 Perucca ~ pp. 474, 478 |

23 | Verifica delle leggi dei gas | Ricamo ~ 8.7 p. 163; 8.8 p. 164 • Perucca ~ pp. 616, 618, 644 |

24 | Esperienza di Clement-Desormes | Perucca ~ p. 704 Tyler ~ p. 140 |

25 | Tubo di Kundt | Ricamo ~ 9.2 p. 180; Perucca ~ pp. 522, 579, 705 • Tyler ~ p. 110 |

## Learning Assessment

### Learning Assessment Procedures

Each group will be involved in 6 laboratory experiences according to a calendar that will be made available by December.

Each group can choose an experience (As) from table A and an experience (Bs) from table B, taking care to make different choices from those of the other groups. In the event that no agreement is reached, the teacher will settle the disputes.

The remaining four experiences (A1, A2, A3, A4) will be assigned by the teacher, taking them from table A

Each group will have time to acquire the data relating to the chosen experience As by the end of the first teaching period (end of January). Immediately after the end of the first didactic period (mid February) he will have to deliver a report (unique for the group) on said experience As.

This report will constitute the ongoing test.

These reports will be corrected and discussed with the students in the classroom at the resumption of the lessons of the second teaching period; students will receive all the information and suggestions requested also in the data acquisition and processing phase.

During the second teaching period, students will be engaged on the other five experiences, according to the calendar that will be provided to them. In this phase, the teacher's instructions will only concern general issues; each group will have to work independently, taking advantage of what they have already learned from the first experience. In addition, all students will have to take the data from the Galton experiment and process them. The results will be discussed in the classroom.

The student on the exam will take an individual laboratory practical test on an experience drawn from among the four (A1, A2, A3, A4), assigned by the teacher to her group. On this experience you will deliver a report with a complete data analysis, which will be discussed during the oral exam.

Oral exam: it focuses on all the topics of the course and on the experiences explained by the teacher during the course, even if no experiments have been made on these. There will be a broad and detailed discussion on the report presented

**Table A**

- Piano inclinato
- Dispositivo di Fletcher
- Macchina di Atwood
- Pendolo semplice (piccole oscillazioni)
- Pendolo semplice (grandi oscillazioni)
- Pendolo fisico piano
- Pendolo sferico e su arco
- Pendolo di torsione
- Ago di Maxwell
- Oscillazioni di una molla
- Momento d’inerzia di un volano
- Energia cinetica di rotazione

**Table B**

- Pendolo reversibile di Kater
- Calorimetro delle mescolanze di Regnault
- Propagazione del calore in una sbarra omogenea
- Picnometro
- Bilancia di Mohr-Westphal
- Sedimentazione
- Viscosimetro di Ostwald
- Tensione superficiale
- Tubo di Venturi
- Verifica delle leggi dei gas
- Esperienza di Clement-Desormes
- Tubo di Kundt

If the teaching is given in a mixed or remote mode, the necessary changes with respect to what was previously stated may be introduced, in order to comply with the program envisaged and reported in the syllabus.

DATES OF EXAMINATION

As a rule, 7 exam sessions are fixed in each Academic Year; consult the Exam Calendar for the Bachelor's Degree Course in Physics: http://www.dfa.unict.it/corsi/L-30/esami.

As illustrated above, these dates refer exclusively to the practical test. Considering the preparation of the laboratory report and the correction by the teacher, the oral exam will be done about 15/20 days after the practical test.

Verification of learning can also be carried out electronically, should the conditions require it.